Sony Ericsson XPERIA ST17 Update To 4 0 4 Done By AzimBahar

Sony Ericsson XPERIA ST17 Update To 4.0.4 Done By AzimBahar



how to install the newest Android 4.0.4 for Sony Ericsson XPERIA Active ST17i :
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirror)
c) download also latest Android 4.0.4 (mirror) for Sony Ericsson XPERIA Active ST17i
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.How to fix wifi Problem After flash with wrong firmware for tablet
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) after few minutes all is done and your phone gets the new firmware

Flashing Log

Quote:

01/000/2013 14:00:25 - INFO - <- This level is successfully initialized
01/000/2013 14:00:25 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
01/000/2013 14:00:29 - INFO - Device disconnected
01/003/2013 14:03:09 - INFO - Selected ST17i / 4.1.B.0.587 / Global
01/003/2013 14:03:09 - INFO - Preparing files for flashing
01/003/2013 14:03:21 - INFO - Please connect your device into flashmode.
01/003/2013 14:03:23 - INFO - Device connected in flash mode
01/003/2013 14:03:24 - INFO - Opening device for R/W
01/003/2013 14:03:24 - INFO - Reading device information
01/003/2013 14:03:24 - INFO - Phone ready for flashmode operations.
01/003/2013 14:03:24 - INFO - Current device : ST17i - CB5A1H8SH5 - 1254-8924_R2I - 1250-5521_4.1.B.0.587 - WORLD-i_4.1.B.0.587
01/003/2013 14:03:24 - INFO - Start Flashing
01/003/2013 14:03:24 - INFO - Processing loader
01/003/2013 14:03:24 - INFO - Checking header
01/003/2013 14:03:24 - INFO - Flashing data
01/003/2013 14:03:26 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
01/003/2013 14:03:26 - WARN - This file is ignored : simlock.ta
01/003/2013 14:03:26 - INFO - Processing kernel.sin
01/003/2013 14:03:26 - INFO - Checking header
01/003/2013 14:03:26 - INFO - Flashing data
01/003/2013 14:03:28 - INFO - Processing fota0.sin
01/003/2013 14:03:28 - INFO - Checking header
01/003/2013 14:03:28 - INFO - Flashing data
01/003/2013 14:03:28 - INFO - Processing fota1.sin
01/003/2013 14:03:28 - INFO - Checking header
01/003/2013 14:03:28 - INFO - Flashing data
01/003/2013 14:03:29 - INFO - Processing adsp.sin
01/003/2013 14:03:29 - INFO - Checking header
01/003/2013 14:03:29 - INFO - Flashing data
01/003/2013 14:03:31 - INFO - Processing amss_fs.sin
01/003/2013 14:03:31 - INFO - Checking header
01/003/2013 14:03:31 - INFO - Flashing data
01/003/2013 14:03:32 - INFO - Processing amss.sin
01/003/2013 14:03:32 - INFO - Checking header
01/003/2013 14:03:32 - INFO - Flashing data
01/003/2013 14:03:39 - INFO - Processing apps_log.sin
01/003/2013 14:03:39 - INFO - Checking header
01/003/2013 14:03:39 - INFO - Flashing data
01/003/2013 14:03:40 - INFO - Processing cache.sin
01/003/2013 14:03:40 - INFO - Checking header
01/003/2013 14:03:40 - INFO - Flashing data
01/003/2013 14:03:40 - INFO - Processing system.sin
01/003/2013 14:03:40 - INFO - Checking header
01/003/2013 14:03:40 - INFO - Flashing data
01/006/2013 14:06:09 - INFO - Processing userdata.sin
01/006/2013 14:06:09 - INFO - Checking header
01/006/2013 14:06:09 - INFO - Flashing data
01/006/2013 14:06:12 - INFO - Ending flash session
01/006/2013 14:06:12 - INFO - Flashing finished.
01/006/2013 14:06:12 - INFO - Please unplug and start your phone
01/006/2013 14:06:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
01/006/2013 14:06:13 - INFO - Device connected in flash mode
01/006/2013 14:06:39 - INFO - Device disconnected

How To Fix Wifi issues Grayed out or Dim

How To Fix Wifi issues - Apple devices are known to be of superior build amongst other devices. However, It has its own share of problem one of which is the issue of difficulty experienced when trying to connect device to a wifi network, locating a wifi network or even browsing on one
How To Fix Wifi issues

In case you have such a device with the aforementioned problems, Just follow the guide below and the problem should be solved. Requirements

• Make sure wireless device is on and broadcasting at the right frequency
• Make sure Apple device is within range of wireless signal.
• If wireless router is passcoded, make sure passcode is known.

How To Fix Wifi issues
Step 1: Tap Settings on your device, and tap Wi-Fi, toggle It Off and On again.
Step 2: Now connect to the displayed wifi network. Once connected, it would be checked.
Step 3: Click on the small blue arrow and then click on forget this network
Step 4: Rejoin network again. Input passcode If asked. Once you have done this. Checked If problem is resolved.
Step 5: If not resolved, reboot device, try connecting again. If problem persist, meet the Administrator of the wireless device to check your wireless band If its compatible with the router being used.
Step 6: However, If problem is resolved, devices would be connected and browsing. In case you need more helps in dealing with this problem don’t hesistate to drop your comments
iF your Wi-Fi settings is grayed out or dim so you have to check the steps below:

Note: This is means that your Wifi address is missing make sure about that go to Settings > General > About (Missing Wi-Fi address):

Follow these steps to resolve the issue:
Step 1: Make sure that airplane mode is off go to Settings –> Airplane Mode.
Step 2: Reset the network settings go to Settings –> General –> Reset –> Reset Network Settings.
Step 3: Make sure that your device is using the latest software. To do so,

• Go to Settings –> General –> Software Update. now your iOS will automatically check for available updates. if there is an available updates download it but you have to connect your device to Wi-Fi and a power source

Blackberry Z10 stuck on pc to mobile comm logo tested Easy solution

tested 4 times to bb Z10

1.if you fail to update with blackberry link software
2.f you fail to update with blackberry desktop software
3.if bb link says no update available
4.if sudden stop downloding update
5.if update drop on 50,60,80%
6.if blackberry link says check your internet connection
7.if problem after security data wipe

try this

simply downlod autoloder with resume and flash Z10 without reeor

http://developer.blackberry.com/blackberry10devalpha/devalpha_update.html

before downlod open bb10 back cover check your phone model STL-100,STL-100-2 etc then downlod be careful check your model number carefully

note: after downlod compleat 1st goto task manager >process ..and end the process of blackberry link or desktop software if installed

NOW start updating

1.Turn off your BlackBerry 10 Dev Alpha device.

2.Run the downloaded Autoloader file.

3.When prompt shows “Connecting to Bootrom”, connect your device to your computer and turn it on.

4.If you have a password set on your device, type your password when prompted.

5.do not touch or move the device when its flashing

6.After your device restarts, complete the set up wizard.
use simcard with internet data activate to complete satup wizard

im not responsible for any damage

How to Hard Reset Samsung Infuse 4G

Solution 2
1. Turn off the device. If it is stuck then try to pull out the battery for a minute and then put it back in.
2. Press down the Volume key and the Power button.
3. Then release the Power button.
4. Now a menu appear give you the options to Fastbook, Recovery, Clear Storage, and Simlock. Select Clear Storage. Use the Volume Down button to navigate the menu.
5. Then press and release the Power button.
6. Finally wait for your device to reboot.
Once the Samsung Galaxy Gio restarted it should now go back to the default factory setting.

Solution 3 - Reset through software menu

1. First go back to the Home screen.

2. Then press on the  Menu key.

3. Next pick Settings.

4. Now choose Privacy.

5. Next choose Factory Data Reset.

6. Then Select Reset Phone. If you want to erase the SD card too then ensure the checkbox Erase SD card is ticked.

 7. Put in the password when prompt.

8. Now tap on Erase everything.

Your phone should start to reboot short and bring itself back to factory setting.

Guide How to Root and Install Recovery Samsung Galaxy Note 3 SM N900

Hi
Step by Step instructions on:

How to Root and Install Recovery Samsung Galaxy Note 3 SM-N900

Prerequisite:

1. Make sure your mobile should have 70 to 80% battery.
2. Enable USB debugging mode (Menu (app drawer) > Settings > Manage Applications > Development > USB Debugging – check box).
3. Ensure that you have backed up your all important data.

Requirements:

1. Download and install Samsung Galaxy USB Drivers (Download USB drivers or download Samsung Kies (drivers included))
2. Download “Odin“.
3. Download “CWM Recovery“.
4. Download “SuperSu“.

install CWM Touch Recovery :

1. Download all files on your computer .

2. Extract “Odin.zip” on the desktop and place “N900-Cwm-Recovery-6.0.3.8(0929).Tar for Samsung Galaxy Note 3” in it.
3. Now boot your phone into Download Mode

4. Open “Odin.exe” (from extracted folder) and connect your phone via USB cable to your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow/green.

5. Click on “PDA” button and select file “.tar.md5” (from extracted folder).
6. Now, click on the Start button on Odin to start the installation process.
7. when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your phone from computer.

((Finish You have successfully installed CWM Recovery))


-------------------------------------------------------------------------
Root :

1. Download all files on your computer .

2. Extract “Odin.zip” on the desktop and place “ CF-Auto-Root-Ha3g-Ha3gxx-Smn900.Zip for Samsung Galaxy Note 3” in it.

3. Now boot your phone into Download Mode

4. Open “Odin.exe” (from extracted folder) and connect your phone via USB cable to your computer in download mode. If your phone is connected successfully the one of the ID:COM boxes will turn yellow/green.

5. Click on “PDA” button and select file “.tar.md5” (from extracted folder).
6. Now, click on the Start button on Odin to start the installation process.
7. when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your phone from computer.

FINISH now your phone is ROOTED

How to hard reset Samsung Galaxy Y Duos

Samsung Galaxy Y Duos Secret Codes
Galaxy Y Dual Sim Code
Here i am going to show you how to access the internal function of galaxy y or android phone for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc... if you have any hardware problem with your galaxy y duos you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad




Then dial the secret code *#0*#. Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on galaxy y

• * #1234# to check software version of phone.
• *#12580*369# to check software and hardware information.
• *#0228# Battery status (ADC, RSSI reading)
• *#32489# Service mode
• *#7780# factory data reset galaxy y
• *2767*3855# Full factory reset (Dont dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series.

How to increase internal memory of samsung galaxy ace

Samsung Galaxy Ace is featured with 832 MHz Processor, a RAM of 512 MB, and a 32 GB upgradable storage. Like the previous Samsung’s Smartphones, it has also created a large user base or fan base. With an affordable price range, they also have provided some really good features with an elegant design and stunning look

Android Smartphone are an excellent way to take all your private and important files, images, data, and all other imperative data with you. Thus we can declare that it is one of the finest gadgets in our pocket which has plenty of information regarding you.

So in this tutorial we will be showing you how to increase the internal memory of your Samsung Galaxy Ace. Just follow the simple steps given below

Disclaimer

This tutorial will definitely work when using Samsung Galaxy Ace only. While working of it on others is not yet confirmed. On applying this installation to another model or device may give an unwanted result. While applying this update we will not be responsible if anything occurs to your device, so continue at your own risk.

Pre-Requisite

• For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
• You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
• One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
• If you have not, then you must unlock your Android device’s Bootloader.
• You must enable USB Debugging mode on your Samsung Galaxy Ace. Just follow, Settings–>Applications–>Development–>USB debugging. There select the USB Debugging icon.

Steps for Increasing Internal Memory of Samsung Galaxy Ace

 

Step 1

Firstly, download MiniTool Partition Wizard app to your computer and then install it. You may download it by just clicking it here.

Step 2

From your Android device disconnect & remove the memory card and insert it in your Computer using a card reader. You must not use USB cable, since this app may not work properly through USBs.

Step 3

Now run the above downloaded app on your computer.

Step 4

Now click on SD card and there do the right click on the “Option” icon. Then select the “Delete” option for a complete deletion of data on your SD card.

Step 5

Now again do the right click on the “Option” icon. Then select the “Create New” option.

Step 6

Now, choose the file type as FAT32 and there allocate the space with such an amount that you believe you’ll be utilizing.

Step 7

Next, again apply the same procedure as above and choose “Create as: Primary”, so to create a new partition (external). This space will be utilized for storing downloaded apps.

Step 8

Finally, select the “Apply” option to finish the process. After this you may insert your SD card into your Samsung Galaxy Ace.

Finished!

How to Jailbreak Your iPhone 4S

How to Jailbreak Your iPhone 4S Using Absinthe (Windows) [5.0, 5.0.1]

These are instructions on how to perform an untethered jailbreak of your iPhone 4S using Absinthe for Windows.

Warning***: Before you continue make sure to do a backup of your device in iTunes as you may lose your Camera Roll during this process.



Step 1
Download the latest version of Absinthe from here.

Step 2
Double click to extract the downloaded archive and launch the Absinthe application.

Step 3
As prompted, connect your iPhone 4S to the computer via USB. Make sure to remove any passcodes or VPN settings youve previously set.

Step 4
Click the Jailbreak button to begin

Step 5
The application will take you through several steps of the jailbreak: Sending initial data, waiting for reboot, waiting for device to finish booting, Preparing jailbreak data, and Sending payload data.

Step 6
You will be informed that the jailbreak is Almost done.

Step 7
On your device, locate the Absinthe icon and press it to complete your jailbreak. It could be on any homescreen.

If the server is down and you get an Error establishing a database connection message then tap the Settings icon on your springboard and turn on VPN.

You will get a configuration error; however, after about a minute your device will reboot with Cydia on the Springboard!